Archives

Polyurethane is an excellent alternative to rubber, plastics and metal.

Polyurethane products are tough, abrasion resistant, oil and chemical resistant and non marking.

Polyurethane parts are available in a range of hardness to suit all applications.

Polyurethane is durable and can outlast rubber by up to eight times.

Polyurethane rollers, polyurethane wheels, polyurethane sheets, polyurethane pressure and leak test seals, polyurethane mouldings, rods, blocks and tubes can be produced at our Birmingham West Midlands factory.

What are the advantages of Polyurethane?
Polyurethane is a unique material that offers the elasticity of rubber combined with the toughness and durability of metal. It can be produced in any colour and is suitable for a wide range of application.

Can Urethane products be replaced ?
Urethane products can replaced metals in sleeve bearings, wear plates, sprockets, rollers and various other parts, with benefits such as weight reduction, noise abatement and wear improvements being realised.

Polyurethane has excellent electrical insulating properties and is used successfully in many moulded wire and cable harness assemblies. Having the ability to be produced in a range of colours and flexibility polyurethane is ideal for use in cable manufacturing.

Continuous use above 225°F is not recommended nor is urethane recommended in hot water over 175°F. At low temperatures, polyurethane will remain flexible down to -90°F. A gradual stiffening will occur at 0°F, but will not become pronounced until much lower temperatures are obtained.

Most formulations offer extremely high flex-life and can be expected to outlast other elastomer materials where this feature is an important requirement. Bellows, dust boots, belts, couplings, diaphragms and similar products are made from urethane for this reason.

The hard urethanes are now being used as gears in products where engineers desire sound reduction. The soft urethanes are used to replace rubbers for improved sound/vibration dampening.

Polyurethane tear-strength is far superior to rubbers, it ranges between 500-100 Ibs./linear inch.. As a result, urethane is often used as drive belts, diaphragms, roll covers, cutting pads, gaskets and chute liners.

Polyurethane material has a higher load-bearing capacity than any conventional rubber. Because of this characteristic, it is an ideal material for load wheels, heavy duty couplings, metal-forming pads, shock pads, expansion joints and machine mounts.

Polyurethane products are weather resistant allowing outside applications. Polyurethane has outstanding resistance to oxygen, ozone, sunlight and general weather conditions.

Polyurethane has excellent resistance to oils, solvents, fats, greases and gasoline allowing it to be used in areas where oils are present.